AlcoMate Prestige Alcohol Breathalyzer With Pre-Calibrated and field Replaceable Sensor Module AlcoMate Prestige with 3 decimal points accuracy is an advanced professional alcohol breathalyzer equipped with "Modular Sensor Technology". AlcoMate Prestige comes with an innovative and patent pending technology that allows users to re-calibrate their breathalyzer without the need for shipping it to ASD for calibration as often as every 6 month to a year. The Prestige users themselves can now swap the sensor module with a factory pre calibrated module and save not only on cost but more importantly they eliminate the risk of being without their breathalyzer while it is out for calibration. The Sensor swapping is an ideal solution for all users specially for clinical users, field officers, or for devices on board a vessel in the open sea. Now vessel operators and clinics can have their always ready and always accurate alcohol testing device. Ordering Information AlcoMate prestige Qty Sales Price   Full Kit       PLUS FREE 2-DAY SHIPPING Single $129.95 3-Pack $379.95 6-Pack $689.95   You will be able to choose color after you place an item in your basket Accessories 2007 Model 2008 Version   AlcoMate Prestige Replacement Sensor IMPORTANT NOTE: There are two un-inter-changable sensor modules available for the Alcomate Prestige. Please read the followings carefully before you order any sensor. To order a correct sensor for your previously purchased AlcoMate Prestige, please watch out for the color of your old sensor's circuit board. Order the right color to ensure compatibility. Sensors with green circuit board work with all Prestiges sold prior to December 2007 and sensors with a red circuit board work for all Prestiges sold after December 2007 including any new Prestige you are buying today. This requires that you first identify the version of the sensor in your previously purchased AlcoMate Prestige before you order any replacement sensor module. If you are ordering an AlcoMate Prestige for the first time you must order the "Red Sensor". For further assistance, please call us toll free (866) 216-8700 or (818)701-9210 from outside The USA.         RED Sensor for all Prestiges sold after Dec. 2007 $29.95   Green Sensor for all Prestiges sold prior to Dec. 2007 $29.95 ALMP-10 10 $7.95       ALMP-50 50 $22.95       ALMP-100 100 $39.95                 Features Package Contents No Need for Calibration Field Replaceable Sensor 3 decimal point accuracy Deep-Lung Air Sampling Cumulative Test Counter Active Pressure Sensor Deep-Lung Air Sampling Cumulative Test Counter Low Battery Indicator Auto Power Off "One-Way-Flow" Mouthpieces AlcoMate Prestige Leather pouch A practical carrying bag 4 Mouthpieces 2 AA Battery Elegant Retail Box Pre-Calibrated field Replaceable Sensor Module ALcoMate Prestige is the first breathalyzer that offers pre-calibrated and field replaceable modules (patent-pending) in the market. One of the main problems with using breathalyzers in critical applications is that the alcohol sensor requires periodic re-calibration. Unfortunately, the re-calibration process requires that the breathalyzer be physically mailed or taken to a professional service center. The process is costly for both consumer and service center, and the delay of processing and shipping back-and-forth can be quite a loss. The Pre-Calibrated Replaceable Alcohol Sensor Module can eliminate the delays and complications of re-calibration by allowing you to simply "snap out" an old module and "snap in" a new one. This way, you can get back to reliable and accurate testing in a matter of few minutes!     Prepare your AlcoMate Prestige.     Use a flat, sharp tool to carefully open the top cover.     Lift the breath tube to access the sensor module.       Remove the breath tube. It should remove easily     Carefully raise the sensor module from the body. Do NOT detach the cable from the body.     Remove the cable from the slot underneath the sensor module.       Prepare a new pre- calibrated sensor module     Insert the cable into the new sensor. Make sure the blue strip is toward the sensor, as shown.     Replace the sensor module into its original position.     Ready For Use   Re-attach the breath tube directly on to the sensor. Make sure the front opening is aligned.     Re-attach the cover on to the top of the body. It should snap in fairly easily.         Technical Specifications Alcohol Sensor Semiconductor Oxide Sensor Dimensions 137 x 73 x 44 mm Colors Black+Silver or Black+Red Plastic Weight 4.1 oz (105 g) including batteries Weight Two 1.5V AA alkaline (included) Detection Range 0.00% ~ 0.40% BAC or Hi/Lo Ranges Device Lifetime ~3000 Tests Calibration Performed at ASD LAB (6~12 months.) Blowing Time 3 sec. (Fast Mode) / 5 sec. (Normal Mode) Accuracy +/- 0.01 at 0.10% BAC Users Law Enforcement, Health Professionals Warranty 1 Year © Alcotesters.com, All Rights Reserved